The Floor Sanding Experts Are Now Mr Sander®Learn More ➔
Posted on May 5, 2023
Floor Sanding Services News
Hardwood floors are a timeless and elegant addition to any home, but they do require regular maintenance to keep them looking their best. One of the most essential tasks in maintaining your hardwood floors is sanding. Contrary to popular belief, sanding your hardwood floors is not rocket science, and you don’t need to be a professional to do it. In this comprehensive guide, we’ll walk you through everything you need to know about hardwood floor sanding, from the equipment you’ll need to the proper techniques to achieve the perfect finish. So roll up your sleeves, channel your inner strength, and let’s get started!
Clearing the room
Before you start sanding your hardwood floors, you must first prepare the room. This involves removing all furniture, rugs, and other items from the room to ensure you have full access to the floor. Additionally, cover any vents, electrical outlets, and switches with plastic sheeting or painter’s tape to prevent dust from getting into these areas.
Assessing and repairing the floor
Examine your hardwood floor for any damages or loose boards. Hammer any protruding nails back into the wood, and tighten or replace any screws that have come loose. If you notice any large gaps between the floorboards, cut pieces of spare wood to size and fit them into the gaps. Smaller gaps can either be left as they are for a rustic, old-world effect or filled with papier-mâché for a seamless appearance.
Gathering the necessary equipment
To sand your hardwood floor, you will need the following equipment:
Note that the upright sander is quite heavy and may require assistance to transport and manoeuvre.
Starting with the upright sander
Attach the coarse sandpaper to the drum of the upright sander and plug it in. Turn on the machine and slowly push it across the floor, moving in the direction of the wood grain. Make sure to keep the sander level and avoid tilting it, as this can cause gouges in the wood. Repeat this process, overlapping each pass slightly to ensure the entire floor is evenly sanded.
Sanding the edges and corners
Once you have sanded the main area of the floor with the upright sander, switch to the smaller handheld sander to tackle the edges and corners. Start with coarse sandpaper and work your way down to fine sandpaper, just like with the upright sander.
Multiple passes with different grits
For the best results, sand your hardwood floor with multiple passes, starting with coarse sandpaper and gradually working your way down to finer grits. This will help to remove any deep scratches or imperfections and create a smooth, even surface.
After each pass with the sander, use a vacuum cleaner or broom to clean up any dust and debris from the floor. This will help you see any areas that may need additional sanding and prevent the buildup of dust, which can cause issues with the finish later on.
Choosing the right stain
After sanding your hardwood floor, you may choose to apply a stain to change the colour or enhance the natural beauty of the wood. There are various types of stains available, including oil-based, water-based, and gel-based stains. Consider the look you want to achieve and the type of wood you have when selecting the right stain for your project. It’s also a good idea to test the stain on a small, inconspicuous area of the floor to ensure it gives the desired result.
Applying the stain
Before applying the stain, make sure the floor is completely clean and free of dust. Using a brush or a clean, lint-free cloth, apply the stain evenly across the floor, following the direction of the wood grain. Allow the stain to penetrate the wood for the recommended time specified by the manufacturer, usually between 5 and 15 minutes. Then, wipe off any excess stain with a clean cloth, again working in the direction of the wood grain. Allow the stain to dry completely according to the manufacturer’s instructions, which can range from a few hours to overnight.
Applying a protective finish
After the stain has dried, it’s time to apply a protective finish to seal and protect your newly sanded hardwood floor. There are several types of finishes available, including polyurethane (water-based and oil-based), wax, and penetrating oil. Each type of finish has its pros and cons, so research your options and choose the one that best fits your needs and preferences.
When applying the finish, follow the manufacturer’s instructions closely. Typically, you’ll need to apply the finish with a brush, roller, or applicator pad, working in the direction of the wood grain. Allow the finish to dry for the recommended time, which can vary from a couple of hours to several days, depending on the product. For added durability, consider applying multiple coats of finish, lightly sanding between each coat with fine sandpaper.
Sanding your hardwood floors may seem like a daunting task, but with the right equipment, proper techniques, and a little patience, you can achieve professional-looking results. By tackling this project yourself, you’ll not only save money but also have the satisfaction of knowing you’ve given your floors the care and attention they deserve. So, don’t be intimidated; roll up your sleeves, tap into your inner strength, and bring new life to your hardwood floors with this DIY guide.
We provide virtually dust-free sanding with our continuous belt machinery with mobile extraction units, giving you a safer environment for your family.
This organic finish not only adds beauty to your home but also has exceptional water-repellent characteristics, making it easier to clean and maintain.
This natural floor finish offers the softest and most mellow appearance – and leaves your floor able to breath.
Using soft buffing machines (and hand-polishing where required) will bring a wonderful sheen to your newly-finished floor.
We offer a full assessment of your wooden floors to determine what repairs are needed to provide the perfect working surface for the later stages of sanding, staining and sealing.
We offer a comprehensive restoration process designed to address floors that are improperly fitted or damaged over time through wear and tear.
Simply enter your postcode below to get started.